Penguin Monitor 8s uses a secure SSH connection for monitoring up to 8 Linux/Unix servers on your LAN or across the Internet. It runs under Windows 9x/Me/XP/NT/2K. Feel free to monitor any server that you want!
While running on a Windows system tray, it connects to each server in required time intervals and checks for interesting information, e.g. important / critical process availability (database, httpd etc.), number of users, uptime or storage capacity. Based on the information it can remind administrator to act accordingly.
It can be easily configured to start automaticaly upon Windows bootup and to alert the administrator directly or via e-mail, when something goes wrong, or when a specified condition is met (a server has restarted, a proces becomes unavailable, or a server is down).
PING-only mode allows you to check whether particular servers or workstations are up, without logging in using ssh.
The software is very compact and contains no graphics. The demo version is fully functional, however, it will run only for 30 minutes and it will not save the setup.
Here are some key features of “Penguin Monitor”:
�￭ Monitoring of 1 to 8 Linux / Unix servers (or workstations) concurrently from a single Windows – based computer.
�￭ Uses secure SSH connection and authentication, ready for the Internet environment
�￭ Checks for server availability, process availability, uptime, storage capacity and other information
�￭ Automatic start upon Windows bootup
�￭ Warnings and error logs can be sent by e-mail either when a condition is met (server or process unavailable) or manually
�￭ Single point of monitoring and important information on your system tray
�￭ Easy to configure and control, with a compact interface containing no graphics
�￭ Buy once, download the newest version as soon as available and activate with the same product key (there is a free upgrade for a lifetime – just watch the website for new versions)
�￭ All of the bug reports and user suggestions are taken into the consideration when a new version is going to be released, so as the product becomes more reliable and powerful
�￭ The size of the whole installation package is less than 1 MB
�￭ Requires just SSH service (port 22) running on each server – no server side installation needed
�￭ Easy network monitoring
Penguin Monitor Crack + (LifeTime) Activation Code [32|64bit]
The most powerful monitoring tool for Windows.
It provides you with the information about the all of the computers (servers) in your LAN or in the Internet. If you run your LAN or Internet servers from one computer, you can monitor all of them from this single computer using this tool.
It can be very handy if you want to keep track of a number of different servers. You can be sure that each of them is running.
You can check servers and their availabilities, process statuses, users, storage capacity, connection quality, uptimes etc.
If something goes wrong with your servers, you’ll receive an alert e-mail automatically.
Do you want to know about all the computers running on your network, in the internet, or on a specific local network?
You should check this software. It will help you.
Thank you for your interest.
Key Features:
�￭ You can monitor any computers on your LAN, Internet, or even on a local network.
�￭ It requires just the SSH service running on each server.
�￭ It can notify you about the availability of any server or process.
�￭ You can monitor each computer, or a number of computers simultaneously
�￭ It can notify you when a server or process goes down.
�￭ A warning or error log can be sent by e-mail.
�￭ A compact and simple to use interface.
�￭ No server side installation required.
�￭ A single product key allows you to use the software as a lifetime license.
�￭ Requirements:
�￭ Windows 9x/Me/XP/NT/2K
�￭ 1.4 GHz Pentium CPU or faster
�￭ 1 MB RAM
�￭ 2 MB free disk space (for installations)
�￭ 1.5 MB free disk space (for the samples)
�￭ A single connection to the internet will be enough
�￭ About Penguin Monitor:
�￭ The software is very compact and contains no graphics. The demo version is fully functional, however, it will run only for 30 minutes and it will not save the setup.
�￭ There are two product keys:
�￭ A single license key allows you to use the software as a lifetime license
�￭ The same
Penguin Monitor Crack License Key Full
Support of various services including LSA, MD5, SHA, etc. and other service implementations based on SSH or SCP. The software includes everything needed to work with them.
Support of multiple services that allows to monitor up to 24 SSH, FTP, etc. based servers.
Support of multiple logfiles (excluding STDOUT) that allows to monitor multi-logging servers.
Support of multiple FIFOS (i.e. to monitor remote servers which use other TCP services instead of SSH, but with SSH set up).
Support of multiple NT domain users.
Support of user passwords, not only the usual server usernames.
Support of target users.
Support of ‘glob’ operations.
Support of networks other than LAN.
Support of sockets other than TCP.
Support of local and remote logfiles.
Support of authentication schemes such as ‘null’, ‘fail2ban’, ‘pam’, ‘radius’, ‘auth.log’, ‘pam.log’, ‘baselayout’, ‘password’ (via any number of passwords per one target user), ‘admin’,’minimal’, ‘normal’,’maximal’,’real’ (even of unknown password length), etc.
Support of load monitoring of the following: processes, users, buffers, CPU, network, and disks.
Support of processor time monitoring.
Support of’salt’ operations for the identification of targets and of target users.
Support of’salt’ operations for the authentication.
Support of’salt’ operations for the encryption (either in the session or on-access).
Support of authentication commands such as ‘passwd’, ‘chfn’, ‘chsh’,’su’,’su -‘, ‘chroot’,’shell’, etc.
Support of ‘pass’ operations to get the currently used password, or to recover it.
Support of password operations (to check if a password is right, and to change it).
Support of file operations such as ’touch’,’rename’, ‘link’, ‘unlink’,’mkdir’, ‘chown’, ‘chmod’, etc.
Support of file operations that include the owner, group, mode and permissions.
Support of file operations that include the ‘owner’, ‘group’, and’mode’ in addition to the permissions.
Support of file operations with setting time stamps and the modification time and ownership information.
Support of ‘rpcinfo’ operations, i.e. to monitor UN
1d6a3396d6
Penguin Monitor Crack +
Penguin Monitor is an easy-to-use, reliable, network based monitoring solution for any Linux / Unix – based system. It connects to any server or workstation via ssh to get all necessary information, like uptime, CPU load, memory, disk space, IP, HTTP, DNS etc. information, and sends warnings and error messages to your Windows – based system tray.
Features
The general features of the product are:
�￭ Monitoring of 1 to 8 Linux / Unix servers (or workstations) concurrently from a single Windows – based computer.
�￭ Uses secure SSH connection and authentication, ready for the Internet environment
�￭ Checks for server availability, process availability, uptime, storage capacity and other information
�￭ Automatic start upon Windows bootup
�￭ Warnings and error logs can be sent by e-mail either when a condition is met (server or process unavailable) or manually
�￭ Single point of monitoring and important information on your system tray
�￭ Easy to configure and control, with a compact interface containing no graphics
�￭ Buy once, download the newest version as soon as available and activate with the same product key (there is a free upgrade for a lifetime – just watch the website for new versions)
�￭ All of the bug reports and user suggestions are taken into the consideration when a new version is going to be released, so as the product becomes more reliable and powerful
�￭ The size of the whole installation package is less than 1 MB
�￭ Requires just SSH service (port 22) running on each server – no server side installation needed
�￭ Easy network monitoring
�￭ Win/Unix based software
�￭ Control all servers using a single console
�￭ Has multi-server features like monitoring of 2 servers, 4 servers etc.
�￭ Can automatically start monitoring as soon as Windows starts (winxp or later only)
�￭ Monitoring can be started and stopped instantly from the tray icon, and can be started with a single click
�￭ Includes a history of all actions taken (start/stop monitoring, sending warning messages etc.)
�￭ Has a built-in web server that allows you to view any of your monitored servers over the web
�￭ There is no need to have a web server to access
What’s New in the?
The Software Penguin Monitor is a quick, easy-to-use and powerful solution for monitoring Linux/Unix servers and workstations over the Internet. With a graphical user interface you can easily monitor all of the servers on your network, or watch a particular one. It connects securely over SSH to each server in required time intervals and checks for interesting information, e.g. important/critical process availability (database, httpd etc.), number of users, uptime, storage capacity, availability of ppp-dial-up access etc. You can set the software to run automatically at Windows startup and alert you with an e-mail, or via e-mail when a specified condition is met. You can also create personal rules for the alerting, e.g. when one of the servers is down, or when the process availability of a particular server or workstation drops below a certain level for a certain amount of time. You can also set up multiple alarms to monitor multiple servers or workstations simultaneously.
The Software Penguin Monitor is designed with a compact, simplistic interface containing no graphics. There are no special commands for monitoring servers and no complex configuration is required to setup monitoring. The software includes support for both dial-up and network based connections. The Windows based software is equipped with a user manual and the source code.
Notes:
This software is free and open source and is distributed under the GNU GPL licence.
@antlion: Thanks for the positive feedback.
@Ants: it’s working now, thanks.
@Joost: In the next version (expected early 2003) the whole monitoring will be done from the web interface (ssh -l webuser -L 8888:localhost:8889 192.168.0.x:7777) and you’ll be able to monitor all of your machines at the same time, from one place.
@Andrew-1: another thing I’d like to do is to use the database to store all the server data (and others) and then use the web interface to monitor/make reports from it.
@Demos: I guess, what you mean is that the interface is so “minimalistic”? I guess it’s just hard to explain 🙂
@Andrew-1: well, I’ve done something else with that, but the new “Penguin Monitor 8s Server edition” will include some new features too.
@Andrew-1: I’ve created a web server and used the PHP and MySQL packages from PHP-Sources to allow remote monitoring. ( You can check the “Monitor” section on the web site.
-Anto
Changes:
Version 1.0.0 – 1.0.18
1.0.17 – 1.0.18.
System Requirements:
Mac: OS X 10.9 or later
Windows: Windows 7 SP1 or later
SteamOS: Steam Play
The minimum system requirements are as follows:
OS: Windows 7 or newer
Processor: Intel Core i3, AMD Phenom II X4, 2.0 GHz or faster
Memory: 4 GB RAM
Graphics: NVIDIA GeForce GTX 550, AMD Radeon HD 5770 or newer
Storage: 20 GB available space
Recommended Requirements:
Windows:
http://mysleepanddreams.com/thebrain-crack-with-license-key/
https://mxh.vvmteam.com/upload/files/2022/06/HHj2sKiMxvtXn5qe1n3W_07_8d86ab4fda773159bb01d28e02d675fc_file.pdf
https://unmown.com/upload/files/2022/06/IcwYAnEZUBFI8doIvVzS_07_8d86ab4fda773159bb01d28e02d675fc_file.pdf
http://www.suaopiniao1.com.br//upload/files/2022/06/KtQKrO83ucLYxshTPOcq_07_8d86ab4fda773159bb01d28e02d675fc_file.pdf
https://max800words.com/e-gold-flash-button-creator-registration-code
http://www.yourhomeinbarcelona.com/2022/06/07/tweak-latest/
http://bookmarkwebs.com/upload/files/2022/06/msS6GPtLojZrZ8HeEOYB_07_8d86ab4fda773159bb01d28e02d675fc_file.pdf
https://claremontecoforum.org/wp-content/uploads/2022/06/yamawash.pdf
https://www.nooganightlife.com/wp-content/uploads/2022/06/jenylea.pdf
https://indiatownship.com/sremote-crack-with-registration-code-win-mac-march-2022/
http://yogaapaia.it/archives/2910
https://l1.intimlobnja.ru/wp-content/uploads/2022/06/listpics.pdf
https://7plusnews.com/business/2022/06/07/10671/
https://www.slowyogalife.com/netools-crack-lifetime-activation-code-free-winmac-updated-2022/
http://bookmanufacturers.org/wp-content/uploads/2022/06/Disk_and_Registry_Alert.pdf
https://tazzakhabar.com/wp-content/uploads/2022/06/rosaniom.pdf
https://think-relax.com/copperlicht-sdk-crack-license-keygen-download-march-2022
https://biodashofficial.com/wp-content/uploads/2022/06/Screenshot_Maker.pdf
http://it-labx.ru/?p=24800
http://simmico.ca/wp-content/uploads/2022/06/DvPlacer.pdf